Asphalt Batch Mix Plant with 59% RAP (Double Drum)

The Coninfra RAP 59 is an asphalt batch mix plant built to put more recycled asphalt back on the road. It uses a double drum design: a virgin aggregate dryer drum and a separate RAP drum. About 50% of the mix is hot RAP from the RAP drum and about 9% is cold RAP fed straight into the mixer, so a total of 59% reclaimed asphalt pavement (RAP) can go into each batch.

3D rendering of the Coninfra RAP 59 asphalt batch mix plant with double drum, front view

How the 59% RAP is achieved

  • Hot RAP, about 50%: RAP is heated gently in its own drum, away from the direct flame, so the aged bitumen in it is not burnt. A drag conveyor carries it to a hot RAP storage on the tower and a weigh hopper feeds it to the mixer.
  • Cold RAP, about 9%: finer RAP is fed from a separate bin feeder and conveyor directly into the mixer.
  • Virgin aggregate and bitumen: the virgin dryer, screen, hot bins and filler system work as in a standard Coninfra batch mix plant, and the plant can also run on virgin aggregate only when the RAP drum is switched off.

Main features

  • Separate virgin dryer drum and RAP drum, each with its own burner
  • RAP bins with variable frequency drive feeders and a dedicated cold RAP feed to the mixer
  • Rejuvenator dosing at the mixer to restore aged bitumen in the RAP
  • Pulse jet baghouse and stack designed to keep emissions low
  • Optional dosing of plastic scrap and cellulose fibre
  • PLC and SCADA control with batch reports
  • Compact plot layout and a control cabin that gives the operator a view of the whole plant

Compare RAP levels in Coninfra batch mix plants

Model Where RAP is added RAP content
Standard batch mix plant No RAP 0%
RAP 15 Aggregate (hot) elevator only Up to 15%
RAP 30 Hot elevator and cold RAP in the mixer Up to 30%
RAP 59 Separate RAP drum (hot RAP) and cold RAP in the mixer Up to 59%

Who should consider a RAP 59 plant

Contractors and producers who have large volumes of milled asphalt and want to cut aggregate and bitumen cost, meet recycling targets on highway and city road projects, or reduce the waste they send to dumps.

Plant Views

3D rendering of the RAP 59 asphalt plant showing the hot RAP drum and virgin drum, rear view
Isometric 3D rendering of the Coninfra RAP 59 double drum asphalt plant
Plan view of the Coninfra RAP 59 asphalt plant layout

Images are 3D renderings of the plant layout. Final arrangement is tailored to your site.

Frequently asked questions

What is RAP?

RAP is reclaimed asphalt pavement, the old asphalt milled from existing roads. It still contains useful aggregate and bitumen that can be reused in new hot mix.

Why use a separate RAP drum?

Heating a high share of RAP in the same drum as virgin aggregate can burn the old bitumen and cause smoke. A separate RAP drum heats it more gently and lets the plant take a higher percentage of RAP.

Can the plant run without RAP?

Yes. With the RAP drum off, the plant produces regular hot mix from virgin aggregate.

Is the 59% figure guaranteed on every job?

It is the design maximum. The RAP share you can use on a project depends on the quality and moisture of your RAP and on the mix specification of the client.

How do I get a quotation?

Send us your required capacity, RAP availability and project location through the contact page, or call our sales team on 90999 41641.

Request a quotation